Researchers propose an analog circuit to read quantum bits
The authors estimate that their design would cut power use per physical qubit at 4 K by 50.4% compared with fixed-point electronics.
Numbers in brackets link to the sources listed below.
In a preprint submitted to arXiv on 17 November, Qirui Zhang and colleagues proposed a circuit called DIRAC for reading quantum bits, or qubits[1arXivCompute Before You Digitize: ADC-less Mixed-Signal Processing for Scalable Cryogenic Qubit ReadoutOpen sourceSources [1]]. The design processes the signals in analog form inside the cooled enclosure before digitizing them[1arXivCompute Before You Digitize: ADC-less Mixed-Signal Processing for Scalable Cryogenic Qubit ReadoutOpen sourceSources [1]].
The authors estimate that the baseband circuitry in a conventional readout receiver uses 50% of the power per physical qubit at 4 K[2arXivCompute Before You Digitize: ADC-less Mixed-Signal Processing for Scalable Cryogenic Qubit ReadoutOpen sourceSources [2]]. This circuitry uses fixed-point logic to classify qubit signals, but the authors attribute 85% of its power use to two operations: digitizing signals at the Nyquist rate and extracting information from each sample[2arXivCompute Before You Digitize: ADC-less Mixed-Signal Processing for Scalable Cryogenic Qubit ReadoutOpen sourceSources [2]].
In the proposed circuit, mixers separate the signals and a second set of circuits averages them to produce a trace for each qubit[2arXivCompute Before You Digitize: ADC-less Mixed-Signal Processing for Scalable Cryogenic Qubit ReadoutOpen sourceSources [2]]. Digitizing those traces lets the receiver dispense with the high-speed converters used in the conventional design, the authors say[2arXivCompute Before You Digitize: ADC-less Mixed-Signal Processing for Scalable Cryogenic Qubit ReadoutOpen sourceSources [2]].
The researchers evaluated readout accuracy using data from 1.12 million experimental shots and checked their model against simulations of the individual transistors[2arXivCompute Before You Digitize: ADC-less Mixed-Signal Processing for Scalable Cryogenic Qubit ReadoutOpen sourceSources [2]]. They report that the model matched the accuracy of a floating-point digital receiver for measurement windows as short as 750 ns[2arXivCompute Before You Digitize: ADC-less Mixed-Signal Processing for Scalable Cryogenic Qubit ReadoutOpen sourceSources [2]]. They estimate that DIRAC would reduce overall power use at 4 K per physical qubit by 50.4% compared with fixed-point electronics and by 68.6% compared with flexible cables connected to room-temperature electronics[1arXivCompute Before You Digitize: ADC-less Mixed-Signal Processing for Scalable Cryogenic Qubit ReadoutOpen sourceSources [1]].
Sources
- 1
- 2
ITANU’s newsroom system produced this article with AI and checked it against the sources listed above. How we work


