# Purdue researchers introduce a flexible touch sensor for robots

The team says a gel cartridge lets the sensor estimate force along three axes at each sensing point. In a robot test, the researchers found that adding touch to vision raised successful peg insertions from 6 of 15 trials to 13 of 15.

Robotics · By ITANU Magazine newsroom · Published 2026-11-19T06:02:47.000Z · 1 min read

## Key points

- Purdue researchers say the pad is about 3.5 mm thick and uses off-the-shelf parts.
- The team reports a median error of 4.8 degrees when estimating the direction of sideways force.
- The researchers say pressure readings helped the robot insert pegs. They found the change in cube-sorting success statistically insignificant.

Purdue’s MARS Lab introduced LuxTac, an optical touch sensor for robots, on its project website [5]. In a preprint submitted to arXiv on 17 November, the researchers describe a flexible pad about 3.5 mm thick made with off-the-shelf parts [1].

The researchers say a plain gel cartridge measures force pressing into the pad [1]. As an object presses deeper into the silicone, less light from an LED returns to the detector beneath it [1]. With a second cartridge, colored walls change the color of the returning light in response to sideways force, letting the team estimate force along three axes at each detector [3].

In tests with three indenter shapes, the authors reported a median error of 4.8 degrees in the estimated direction of sideways force [1]. For the robot trials, they used pressure as the sole touch input [3].

In cube sorting, successes rose from 5 to 6 in 15 trials, a change the authors found statistically insignificant [3].

## Sources

1. [LuxTac: A Flexible, Scalable, and Open-Source Optical Taxel Array with Distributed Three-Axis Force Sensing for Tactile Robot Learning](https://arxiv.org/abs/2611.23575), arXiv (Primary)
2. [LuxTac: A Flexible, Scalable, and Open-Source Optical Taxel Array](https://luxtac.github.io/), LuxTac project (Primary)
3. [LuxTac: A Flexible, Scalable, and Open-Source Optical Taxel Array with Distributed Three-Axis Force Sensing for Tactile Robot Learning](https://arxiv.org/html/2611.23575v1), arXiv (Primary)
4. [AdeeshDesai/LuxTac-Sim](https://github.com/AdeeshDesai/LuxTac-Sim), LuxTac project (Primary)
5. [luxtac/luxtac.github.io](https://github.com/luxtac/luxtac.github.io), LuxTac project (Primary)
6. [Types of internal forces](https://engcourses-uofa.ca/books/statics/internal-forces/types-of-internal-forces-and-their-diagrams/), University of Alberta (Independent)

ITANU’s newsroom system produced this article with AI and checked it against the sources listed above.

Canonical: https://itanu.org/magazine/purdue-researchers-introduce-flexible-touch-sensor-for-robots-h626ymts/
